Universal Beam Clamps for industrial distribution, project purchasing and OEM supply, with material, finish and documentation agreed per quotation.
Beam clamps create an attachment point on a compatible structural beam flange without drilling or welding. Selection starts with flange geometry, connection size, load direction, service environment and verified product data.
Most parts in this range are made or adapted for a drawing, sample, mating interface and order program. The image on this page represents the product family; final geometry, material, finish, inspection and marking are confirmed in the quotation.
Universal Beam Clamps belongs to the beam attachment category. Material names, standards and coating descriptions below help buyers structure an RFQ; they are not a declaration that every offered configuration complies. Grade, edition, inspection level and acceptance criteria belong on the controlled drawing or purchase specification. (industry reference data, final values per drawing/quotation)
Malleable iron, ductile iron and carbon steel are established specification routes. Grade, heat treatment, section thickness, casting soundness, thread condition and coating all influence performance and must be tied to the approved configuration.
Use the tensile strength, yield or proof strength, elongation, hardness, impact and heat-treatment requirements published for the selected material grade. Relevant properties differ by product form and test-piece basis. They describe material quality, not the capacity of the finished Universal Beam Clamps; final suitability depends on geometry, interfaces, manufacturing condition and verification.
Specify plain, zinc-coated, hot-dip galvanized, painted, passivated or another compatible finish by a recognized coating specification where applicable. Define preparation, appearance, restricted substances, repair rules, packaging and required inspection documents instead of relying on a color photograph.
| Reference | Standard name | How to use it |
|---|---|---|
| ASTM A47/A47M | Ferritic Malleable Iron Castings | Use as an RFQ reference only when applicable; edition, scope and acceptance evidence must be agreed. |
| ASTM A536 | Ductile Iron Castings | Use as an RFQ reference only when applicable; edition, scope and acceptance evidence must be agreed. |
| ISO 5922 | Malleable cast iron | Use as an RFQ reference only when applicable; edition, scope and acceptance evidence must be agreed. |
| ISO 1083 | Spheroidal graphite cast irons — Classification | Use as an RFQ reference only when applicable; edition, scope and acceptance evidence must be agreed. |
| ASTM B633 | Electrodeposited zinc coatings on iron and steel | Use as an RFQ reference only when applicable; edition, scope and acceptance evidence must be agreed. |
| ISO 1461 | Hot dip galvanized coatings on fabricated iron and steel articles | Use as an RFQ reference only when applicable; edition, scope and acceptance evidence must be agreed. |
Specification caution: naming a material, coating or dimensional standard does not create a product rating, approval, certification or warranty. Any required capacity, pressure class, temperature limit, listing or test must be confirmed for the exact quoted part. (industry reference data, final values per drawing/quotation)
Selection for Universal Beam Clamps should begin with beam profile, flange thickness and taper, connection thread, installation orientation, force direction, restraint and environmental exposure. Keep required facts separate from supplier proposals so reviewers can see what is mandatory and what remains open. (industry reference data, final values per drawing/quotation)
| Decision | Information to provide | Why it matters |
|---|---|---|
| Interface and geometry | Drawing, nominal or actual dimensions, tolerances, mating components, clearances, orientation and accessible assembly space. | Prevents selection from a family name or image and allows the complete connection to be checked. |
| Service condition | Function, direction of forces, movement, vibration, indoor or outdoor exposure, moisture, chemicals and maintenance access. | Guides material, finish, locking, restraint and inspection choices without inventing an unverified rating. |
| Compliance route | Destination market, governing code, required standard edition, customer specification, marking and third-party approval needs. | Separates a generally suitable design from a configuration qualified for a regulated project. |
| Supply and quality | Quantity, release pattern, drawing revision, critical characteristics, sampling, traceability, packaging and documents. | Aligns manufacturing and inspection with the commercial requirement and repeat-order control. |
Ask the supplier to identify exclusions and assumptions in the quotation. Compare offers against the same revision and requirement list; a lower price is not comparable if material, coating, inspection, packaging or documentation scope differs. Final commercial values remain per quotation.
(industry reference data, final values per drawing/quotation)
Match labels, part identity, material or heat references where required, quantity and documents to the purchase order. Quarantine mixed, damaged, corroded or unidentifiable pieces instead of releasing them to installation.
Verify the actual mating dimensions, thread or connection form, contact surfaces, orientation and working clearance. Clean protective debris without removing functional coatings or altering critical edges.
Verify the flange and clamp identity, fully seat all contact surfaces, engage the mating thread correctly, and tighten only by the instruction for the exact assembly. Fit a compatible retaining device wherever the system design requires one, and never drill, weld, heat or grind the clamp unless expressly approved. Any torque, clearance, sealant, gasket, lubrication or locking value must come from the approved instruction for the exact product.
Record completion where the quality plan requires it. Inspect for seating, alignment, locking, leakage where relevant, coating damage and interference. Establish service checks from the system risk assessment and replace parts that fail the applicable acceptance criteria.
Compare threaded, flange, universal, electrical and retaining-strap arrangements by the actual beam interface, attachment direction, permitted orientation and need for secondary restraint. Compatibility includes the mating dimensions, material couple, coating, fastener or seal system, installation method, inspection basis and service environment. (industry reference data, final values per drawing/quotation)
Best when an established size, connection and documented product scope match the application. Confirm the exact designation and do not extend published information to another variant.
Useful when the required function or interface differs. Review the whole assembly, because an alternative component can move forces, change clearances or require different accessories and installation controls.
Consider when geometry, material, marking, finish or packaging cannot be met by a standard item. Freeze the drawing, validation plan and change-control route before repeat production.
(industry reference data, final values per drawing/quotation)
No. The reference helps define material, dimensions, coating, test method or use practice within its own scope. Compliance requires the applicable edition, product configuration, acceptance criteria and agreed evidence. A standards list on a general webpage is not a certificate.
Name the material standard, grade, product form, heat-treatment condition where relevant, required inspection document and any supplementary tests. Use the values in the governing published standard rather than copying an isolated number. Finished-product capacity or performance still requires design and verification for the exact geometry.
Provide a legible drawing or complete dimensional description, application and mating parts, material and finish, quantity and release schedule, destination market, required standards, critical characteristics, marking, packaging and document needs. Identify any requirement that cannot change.
Only after technical and commercial review. A substitute can change strength, ductility, corrosion behavior, friction, thread fit, coating thickness, galvanic compatibility, manufacturing route and inspection evidence. Record an approved deviation before production.
Request verified data for the exact part number, revision, material, assembly orientation and mating components. The quotation or approved technical package should state the applicable basis. This page intentionally supplies no invented load, pressure, temperature or price values.
Check identity, quantity, revision, obvious damage, corrosion protection, critical dimensions and the documents named in the purchase order. Sampling, gauges and acceptance limits should be agreed in the quality plan. Keep nonconforming items segregated pending disposition.
A custom route is appropriate when the standard interface, geometry, material, finish, marking, inspection or packaging cannot satisfy the application. Provide annual demand and validation expectations so tooling, casting, forging, stamping, machining or fabrication options can be reviewed.
Reference the approved drawing revision and agreed specification, preserve approved samples or inspection records as appropriate, and require notification before material, process, tooling or supplier changes that affect critical characteristics. Reconfirm requirements after a design or application change.
A universal clamp may accept several rod positions, flange thicknesses or mounting faces. This reduces inventory, but the usable combinations must remain documented. State beam type, measured thickness and taper, mounting face, rod size and direction, set-screw position and force direction. Require a table or drawing mapping each permitted orientation to its verified data; do not apply the best catalog value to every arrangement.
Material routes include ASTM A47/A47M malleable iron, ASTM A536 ductile iron and purpose-designed steel fabrications. Material properties do not validate all “universal” combinations. Check the finished body, tapped holes, screw, locknut and restraint accessory together. Specify exposure and coating system, then confirm thread function and wet-service compatibility after finishing.
Match the exact installation orientation. Seat the body on a sound flange; some designs explicitly require the set screw on the sloped side of an I-beam. Tighten by the exact instruction, align the rod with its port and add the approved strap when required. Never invent another position by reversing hardware, adding spacers, grinding a jaw or drilling a hole.
Research sources: nVent CADDY 300M Universal Beam Clamp and BC Beam Clamp data; MSS SP-58; ASTM A47/A47M and ASTM A536. Accessed August 1, 2026.
Representative product-family image. Final geometry, material, finish and marking follow the approved drawing and quotation.
Universal Beam Clamps for industrial distribution, project purchasing and OEM supply, with material, finish and documentation agreed per quotation.
| Product family | Beam Clamps |
|---|---|
| Supply route | Standard configuration or made to requirement |
| Materials & finish | Malleable or ductile iron and carbon steel; plain, electro-zinc, hot-dip galvanized and application-specific coatings. |
| Applications | Threaded-rod suspension, pipe support, conduit, cable tray and building-services attachments. |
| Documentation | Inspection, traceability and shipment records agreed per quotation |
Define this requirement on the drawing or RFQ so the offered configuration can be checked.
Define this requirement on the drawing or RFQ so the offered configuration can be checked.
Define this requirement on the drawing or RFQ so the offered configuration can be checked.
Define this requirement on the drawing or RFQ so the offered configuration can be checked.
We review geometry, interfaces, service environment and critical characteristics before confirming the supply route.
Casting, forging, machining, stamping, fabrication and finishing are matched to part geometry and repeat volume.
Material checks, dimensional inspection, surface review and agreed records are defined around the quoted part.
Standards note: referenced standards, ratings and certifications vary by product and market. State every required standard in the RFQ; no rating should be inferred from a category image or general description.
Universal Beam Clamps are part of the beam clamps family. Beam clamps create an attachment point on a compatible structural beam flange without drilling or welding. Selection starts with flange geometry, connection size, load direction, service environment and verified product data.
Provide a drawing, dimensions or reference part number, plus material, finish, quantity, application, destination market and documentation needs.
Malleable or ductile iron and carbon steel; plain, electro-zinc, hot-dip galvanized and application-specific coatings. Availability is confirmed against the exact geometry, quantity and service conditions.
Check beam profile and flange thickness, rod or fastener size, load direction and restraint, indoor, outdoor or corrosive service. Final suitability must be verified against the quoted product data and application.
Yes. Drawing-based development can cover geometry, material, machining, finish, marking, packing and inspection requirements, subject to manufacturing review.
Required inspection and shipment documents should be listed in the RFQ. Applicable records are agreed before order confirmation.